
How water gets into masonry
Brick and stone are not solid all the way through; both have tiny pores that absorb some amount of water. Rain, melting snow, and even humid air can work moisture into these surfaces over time. Mortar joints, being softer than brick or stone, tend to absorb even more. This is normal and expected, but it sets up the conditions for freeze damage later. Water moves into masonry fastest where the surface already has small cracks or worn mortar. These weak points act like doorways for moisture to travel deeper into a wall or a set of steps. Once inside, water can sit in these spaces for hours or days depending on the weather. This waiting period is where the real trouble begins once temperatures drop.
Older masonry with unsealed or worn joints holds more moisture than a wall in good repair. That difference explains why some structures age faster than others even in the same climate. Understanding this step is the key to understanding why freeze and thaw cause the damage they do.
What happens when water freezes
Water expands by a noticeable amount when it turns to ice, and that expansion happens inside the pores and cracks it has filled. Brick, stone, and mortar cannot expand at the same rate, so pressure builds inside the material.
This pressure pushes outward against the surrounding structure with real force. Repeated over many freeze cycles, it slowly pries apart material that once held together.
A single freeze rarely causes visible damage on its own.
It's the repetition across a winter, thaw and freeze again and again, that wears down joints and surfaces. Each cycle widens existing cracks slightly and creates new ones in weaker spots. This is why freeze damage often becomes visible only after several seasons of exposure.
Stone tends to hold up differently than brick because of its density and how it absorbs water. Denser stone resists this pressure better, while more porous stone can flake or crack sooner. Mortar, being the softest material in most masonry structures, often shows the first signs of freeze and thaw wear.
Signs of freeze and thaw damage
Flaking or peeling on the surface of brick or stone, sometimes called spalling, is one of the clearest signs of freeze damage. It looks like thin layers popping off the surface, exposing rougher material underneath. This usually starts small and spreads with each additional winter. Spotting it early can help limit how much surface area needs repair later.
Cracks that appear or widen specifically after a cold season point to freeze and thaw as a likely cause. These cracks often run through mortar joints first since mortar is softer than the brick or stone around it. A crack that wasn't there in fall but shows up by spring fits this pattern closely. Comparing photos from season to season can help confirm the timing.
Steps, walkways, and low walls near ground level often show freeze damage before higher walls do, since they sit closer to standing water and snow.
Uneven settling or shifting stones in these areas can be a result of repeated freeze cycles working beneath the surface. This makes ground-level masonry worth checking closely each spring.
Reducing freeze and thaw wear
Keeping mortar joints in good condition is one of the more direct ways to limit how much water gets into a wall.
Sound mortar sheds water instead of absorbing it, which reduces the amount available to freeze. This is why regular mortar checks matter even outside of any visible problem. Tight joints hold less water going into winter.
Directing water away from masonry surfaces, through grading or drainage, also reduces how much moisture collects near a wall or a set of steps. Standing water near a foundation or a walkway has more time to soak in before a freeze hits. Small changes in how water drains around a structure can lower the amount of moisture masonry absorbs each season.
Addressing small cracks or gaps before winter arrives limits how much water has a chance to enter and freeze inside them. This kind of seasonal check is a low effort way to slow down long term wear. It won't stop the freeze and thaw cycle itself, but it can reduce how much damage each cycle causes.
When repair makes sense
Once spalling, cracking, or shifting shows up, the damage tends to continue each winter unless something changes. Waiting through another freeze cycle usually means more material to repair rather than less. Getting an opinion on the extent of the damage helps decide whether a small patch will hold or whether a larger section needs rebuilding. This decision is easier to make with a clear look at how far the damage has spread. Comparing the condition of masonry from one year to the next is a useful way to judge whether freeze and thaw damage is speeding up. A wall that seemed stable for years but shows new cracks after one hard winter deserves a closer look. This kind of change is often the point where a repair becomes worth scheduling rather than watching.
Stonewick Masonry
Call (360) 555-0118 or send the quote form to discuss brick or stone work with Stonewick Masonry.